Label & Band Applicator - Soiled Linen Bags

SLEEVE LABELERS

SHRINK SLEEVE LABEL & TAMPER BAND APPLICATOR

The SX-150 Shrink Sleeve Label and Tamper Evident Band applicator from Streamline Solutions is a mid-range labeling machine designed for middle, full body, and full body and cap applications. The SX-150 is designed for low to moderate production rates and is a perfect solution for industries including food and beverage, pharmaceutical, nutraceutical, health and beauty, consumer goods, chemical, and other manufactured goods. Due to the versatility of the system, the SX-150 is also ideal for the changing needs of contract packagers.

STANDARD COMPONENTS

Round cylindrical mandrel
Round Cutter
Single round 400 mm timing screw
Photo eye for registered cutting
Label brush down device
Dual roll unwind system and tension control

TECHNICAL SPECIFICATIONS

Power: 220V/3ph/20A or 480V/3ph/10A; 50/60 Hz
Film Thickness:035mm – 0.07mm
Film Lay Flat: 40mm – 240mm
Cut Length: 40mm – 200mm, or modification to 70mm – 250mm
Machine Dimensions: 853mm (W) x 1090mm (L) x 1850-2150mm (H) 33.6” (W) x 42.9” (L) x 72.8” – 84.6” (H)
Speed: 50 – 300CPM

OPTIONAL FEATURES

Irregular mandrel, timing screw, and cutter for non-cylindrical containers
Dual belt drive system for stopping label for mid-body label applications
Vertical and T-Perforation units
Label tamp-down device
Dual 400mm and 800mm timing screw assemblies for irregular containers

Increase Your Workflow

SX-150 is an in-line single-head mandrel-style labeling system engineered to meet the demand of your workflow. The SX-150 can be rolled up to any conveyor to provide accurate shrink sleeve placement of up to 300 products per minute. The machine’s sturdy Good Manufacturing Practices (GMP) design and construction provide for 24-hour operation, while its standard dual unwind system allows continued operation with only a brief splicing stop. Product runs are programmed with the user-friendly touch-screen control panel HMI, featuring standard and custom menus that can be password protected for an added layer of security.

Guaranteed Precision. Quick Changeover.

Size changeovers are simple and quick. The cut length can be changed electronically by utilizing the control panels’ touchscreen interface. For different product diameters, a new timing screw and bullet (mandrel) can be installed in minutes, while different product heights are accommodated by raising or lowering the machine with a turn-screw mechanism. The SX-150 comes with our quick change system for switching mandrels with a turn of a knob. Along with the mandrel, the cutter assembly has only two levers to turn, keeping your downtime to a minimum.